Renovation of a service station / car wash facility in Redding, California. Completed plans call for the renovation of a service station / car wash facility.

Contractor shall furnish all equipment, tools, material and labor to install new "Two-post 12,000 pound capacity symmetrical vehicle lift(s)" per the specifications and to the satisfaction of the city as outlined within this proposal. If required, the proposer shall provide or obtain any required engineered plans or permits from the city of redding. Work performed must meet all local and state building codes. If concrete replacement is required, the concrete must meet all manufacture requirements for the vehicle lift model provided. If required, contractor is responsible for all aspects of the original concrete demolition and removal of debris as well as all aspects of the new concrete, including foundation prepwork, backfilling, compaction, wire mesh or rebar installation (if required), concrete pouring, testing and clean up. If any equipment or dumpster rentals are needed for the demolition, cleanup, or removal of debris, said rentals are the sole responsibly of the contractor. The fleet maintenance shop has a forklift on site for loading, unloading and lift placement; although the forklift will only be operated by city personnel as contractors will not be permitted to operate city equipment. Contractor will install the vehicle lift using anchors and mounting hardware in compliance with the vehicle lift manufactures specifications. Installation of the lift will include any hydraulic piping or connections, and electrical connections, including conduit, wiring and switches. Contractor will perform system tests and start up as well as installing any required signage or safety placards. In addition to system testing, contractor will be asked to demonstrate vehicle lift controls, operations and safety devices for the shop foreman and fleet manager. Contractor will certify the lifts upon completion and provide the fleet manager appropriate documentation Lift specifications vehicle lift must meet the following specifications. Any deviations from these specifications must be clearly and concisely notated within the submitted proposal. O 12,000lb capacity o surface mounted two-post drive through lift o symmetric configuration o clear floor (unobstructed) o 3 stage (triple) telescoping adjustable arms o telescoping footpads with stack adapters o automatic stop overhead switch o minimum of 76 inches of lifting height o minimum of 2hp motor o minimum 58" of arm reach at max setting o capable of accommodating electric vehicles/hybrids or wider platforms Bid bond or certified check and all required Evaluation/review complete june 28, 2024 Work to commence (estimated) july 22-26, 2024 .The city of redding reserves the right to reject any or all quotes, in part or in their entirety. In addition, the city will award any resulting purchase order or contract in a manner consistent with the city purchasing ordinance. Bid date notes: all quotations must be submitted on the standard quotation forms provided by the city of Redding, accompanied by the bid bond or certified check and all required attachment documents. Quotations may be sent via: o overnight delivery o u.S. Mail to address listed in this cover page o hand delivered to the address listed in this cover page 1. Original quote proposal form is completed and signed. 2. Signature is legible - indicating full first and last name - 3. Bid bond or certified check is submitted with proposal. 4. All required attachment forms are completed and received. 5. Submission must be received by the date and time indicated on this form. It Is the bidder's sole responsibility to ensure it is received by that date/time. Question deadline 06/07/2024 at 5:00 pm pt any questions regarding this rfq shall be submitted in writing to tyler nash, buyer, via email at tnash@cityofredding.Org