Demolition, site work, paving, outdoor lighting and renovation of a civil project in Tulalip, Washington. Completed plans call for site work for a road / highway; for outdoor lighting for a road / highway; for paving for a road / highway; for the demolition of a water / sewer project; for the renovation of a water / sewer project; and water / sewer project.

The Work includes the demolishing of the existing vacuum prime pump station and associated piping and steel beams and brackets in the wet well, demolishing the existing fencing and portions of the existing concrete block wall, a light pole, an electrical panel, and various electrical devices, raceways, and conductors. The work also includes isolating the existing wet well and providing temporary bypass pumping, cleaning, sealing, and coating the existing wet well. The work includes two submersible pumps installed in the existing wet well with bases, pump removal rails, and appurtenances and connecting the pumps to the existing force main with ductile iron piping, fittings, isolation valves, check valves, thrust restraint, and providing a combination air/vacuum release valve and bypass pumping port. The work includes factory applied epoxy coating on exposed piping, fittings, and valves within the wet well and vaults. The work includes a new cast-in-place concrete slab on wet well, installing a valve vault, installing a meter vault with a magnetic meter and an adjacent pressure transmitter and gage assembly, and installing a saddle type bypass manhole. The work includes hatches cast into the top slabs for all the manholes and vaults and drain piping for hatches and the vaults and bypass manhole into the wet well. The Work also includes site temporary erosion and sediment control, safety shoring, dewatering, and site restoration. The work includes a concrete slab at the electrical panels, asphalt paving for a driveway leading up to the wet well and valve vault, gravel surfacing within the fencing limits. The work includes re-grading the site and furnishing a new fence with an access gate and adjacent vehicle gate. The work includes furnishing a water service and yard hydrant. The work includes providing a new concrete base for the existing engine generator and relocating the generator on to the new base. The work includes a new pump control panel with variable frequency drives for each pump, disconnects, a programmable logic control, uninterruptible power supply, devices and integration into the existing Supervisory Control and Data Acquisition system, and appurtenances. The work includes lighting, raceways, and conductors for motors, sensors, and lighting, and alarms. The work includes a new termination panel and intrinsically safe relays to isolate the wet well from the control panel.