Site work and renovation of a playground / park / athletic field in Dardenne Prairie, Missouri. Completed plans call for the renovation of a playground / park / athletic field; and for site work for a playground / park / athletic field.

As of November 7, 2024, this project has not yet been awarded. A timeline for the award has not yet been established. Any questions or clarifications concerning this Request for Bid must be submitted in writing via E-mail (preferred), mail or fax to: Brandy Mabry, Purchasing Coordinator St. Charles County Government Finance Department 201 North Second Street St. Charles, Missouri 63301 bmabry@sccmo.org Questions concerning the specifications should be made via email to: Andy Fleck, Assistant Director of Parks St. Charles County Government Parks Department 201 North Second St, RM 510 St. Charles, Missouri 63301 636-949-7535 ext. 1928 wwoods@sccmo.org. The bid number and title shall be referenced on all correspondence. St. Charles County reserves the right to accept and/or reject any and all bids. All questions must be received no later than 2:00 PM on 09/26/2024. Any question received after this deadline may not be answered. 1. Remove existing TPO membrane and damaged insulation to the existing insulation and dispose of legally. (Include 200 square feet of 3" insulation in base bid) 2. Furnish and install new %" or %" polyisocyanurate coverboard insulation, mechanically attached to the steel deck. Fastening pattern shall comply with Manufacturer's I-90 wind uplift requirements and corner and perimeter fastening shall be enhanced to meet ASCE7 design criteria. All polyisocyanurate insulation shall meet ASTM C 1289-06, Type II, Class 4, Grade 1. 3. Polyisocyanurate crickets and saddles need to be installed at the high sides of units and between water outlets. All polyisocyanurate insulation shall be meet ASTM C 1289-06, Type II, Class 1 Grade 2 (20 psi) 4. Furnish & install tapered edge strip to transition from %" to zero, at drains, gutter edge and saddles.Furnish and install .060 Fully Adhered TPO Class A fire rated roof system according to manufacturers' published specifications and requirements. Adhesive shall be aerosol or other low odor material. 6. Owner's option, furnish and install .060 attached TPO roof system Class A fire rated roof system according to manufacturers' published specifications and requirements, Rhino Bond preferred. 7. Furnish and install new ES-1 rated coping cap or fascia metal as specified at perimeters. No shop fabricated coping. 8. Furnish & install new polymer gas line supports. 9. Paint all existing gas lines yellow. 10. Furnish and install walk pad at the service side of units and at access hatch. 11. Furnish manufacturer's Twenty-year material & workmanship warranty with 72mph wind coverage. Manufacturer's warranty must include perimeter metal.