Site work and paving for a transportation facility in Santa Barbara, California. Completed plans call for site work for a transportation facility; and for paving for a transportation facility.

Scope of Work: Router out and prep 60,000 lineal feet of surface cracks in asphalt taxiways throughout Air Operations Area at the Santa Barbara municipal airport, prep and fill with approved crack seal product to industry standards. Repaint airfield markings damaged by crack seal project to FAA standards. The amount of restriping will be determined by crack seal damage. Project Type Bid Response Types Line Items Subcontractor REFER TO SECTION 1.7 ORIGINAL DOCUMENTS FOR BID SUBMITTAL REQUIREMENTS (required) Type of Award Lump Sum License Requirements A or C-32 Payment Bond 100.00% Performance Bond 100.00% Online Q&A Yes Q&A Deadline 10/04/2024 12:00 PM (PDT) The project encompasses the Preparation and crack sealing of 60,000 lineal feet of corrupted asphalt discovered in pavement inspections to comply with FAA standards. Work to be performed at these locations will include furnishing all insurance, bonds, labor, materials, tools, equipment, supervision, and appurtenances necessary to pre-sweep and post-sweep the area as required, remove and re-stripe all paint, and perform other related work as necessary to provide a complete project. All laborers will always be under the supervision of Airport staff due to all work performed will be within the Air Operations Area (AOA) secure area of the airport. All work to be in accordance with the FAA Advisory Circular 150/5340-1M and the AC 150 Marking Plan. In accordance with Civil Code & 9550, if the bid exceeds $25,000, the Successful Bidder shall furnish within ten (10) consecutive calendar days after written Notice of Award, a Payment Bond in an amount equal to one hundred percent (100%) of the total amount of the bid as well as a separate Performance Bond in the amount of 100% of the bid total. engineer's estimate $150,000