This is a service / maintenance or supply contract in Estevan, Saskatchewan. Contact the soliciting agency for additional information.

Reference Number 0000284920 Question Acceptance Deadline 2025/01/17 03:00:00 PM CST SaskPower Boundary Dam Power Station is seeking the fabrication and supply of quanitity Boiler Tube Panels constructed of 2-1/2"OD, .240MWT boiler tube and welds of C1018 membrane per SPC drawing A115 6113.160.00 supplied as a separate document in the Merx posting. All materials must meet quality control ASME standards provided in the full description captured in the RFQ specifications. Panels must arrive on-site the week of March 24th, 2025 Assembly, Contents: 3 Hockey Stick Tube Bends, C1018 Membrane, Material: Sa210a1 Seamless Tubes, Membrane Material is C1018, Type: Panel, Boiler Additional Features: 2-1/2"Od, 240mwt, 3" Centres, Includes Welded Membrane of Material C1018 Stopping 12" From Each End, Hockey Stick Tube Bend Angle 34 Degrees, 4" Centre Line Radius, @ 10 Feet Long, Leg Lengths From Bend 36" and 84". Specific Use: Bd3 Boiler Waterwalls. Mpn: as Per Spc Drawing A115 6113.160.00 Material Preassembled by Attachment Welds Shall Have the Welding Performed in Accordance With Asme I. The Supplier or Manufacturer Shall Certify That the Material and Fabrication Are in Accordance With Asme I. This Certification Shall Be Supplied in the Form of Bills of Material and Drawings With Statement of Certification. Material Must Conform to Current Asme Section Ii Code. Non-destructive Electric Test Accepted Where Applicable. Vendor Must Supply a Certified Test Report (Mtr). Material to Be Continuously Marked by Supplier With Spec/grade/manufacture/size/heat #/saskpower Material #. Assembly, Type: Panel, Boiler Contents: 3 Hockey Stick Tube Bends, C1018 Membrane, Material: Sa210a1 Seamless Tubes, Membrane Material is C1018, Additional Features: 2-1/2"Od, 240mwt, 3" Centres, Includes Welded Membrane of Material C1018 Stopping 12" From Each End, Hockey Stick Tube Bend Angle 34 Degrees, 4" Centre Line Radius, @ 10 Feet Long, Leg Lengths From Bend 36" and 84". Specific Use: Bd3 Boiler Waterwalls. Mpn: as Per Spc Drawing A115 6113.160.00 Material Preassembled by Attachment Welds Shall Have the Welding Performed in Accordance With Asme I. The Supplier or Manufacturer Shall Certify That the Material and Fabrication Are in Accordance With Asme L This Certification Shall Be Supplied in the Form of Bills of Material and Drawings With Statement of Certification. Material Must Conform to Current Asme Section Ii Code. Non- Destructive Electric Test Accepted Where Applicable. Vendor Must Supply a Certified Test Report (Mtr). Material to Be Continuously Marked by Supplier With Spec/grade/manufacture/size/heat #/saskpower Material # Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.