Site work and paving for a road / highway in Bend, Oregon. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Class of Work of this Project is Asphalt Concrete Paving and Oiling. The value for this Contract is estimated to be between $400,000 and $450,000. The Work will consist of, but not be limited to, the following: Install and maintain temporary traffic control. Perform public outreach. Construct latex-modified emulsified asphalt slurry seal wearing surface. Perform additional and incidental work as called for by the specifications and plans. Inquiries pertaining to these specifications shall be directed to Blaine Wruck, Sr. Transportation Engineer, in writing at Blaine.Wruck@deschutes county.gov or the address above. Bids shall be made on the forms furnished by the County, including a Bid Bond or Cashiers Check for the minimum amount of 10% of the Bid Price, addressed and mailed or delivered to Chris Doty, Department Director, 61150SE 27th Street, Bend, Oregon 97702 in a sealed envelope plainly marked "BID FOR SLURRY SEAL 2025" and the name and address of the bidder. Because the work called for under this contract is for a public works project subject to state prevailing rates of wage under ORS 279C.800 to 279C.870, the County will not receive or consider a bid unless the bid contains a statement by the bidder that the bidder will comply with ORS 279C.838 and ORS 279C.840. Bidders shall be prequalified with the State of Oregon for the Class of Work stated above in accordance with ORS 279C.430 through 279C.450 and Deschutes County Code 12.52.020. Bidders shall be licensed with the Construction Contractor's Board. Contractors and subcontractors need not be licensed under ORS 468A.720. Deschutes County may reject any bid not in compliance with all prescribed bidding procedures and requirements, and may reject for good cause any or all bids upon a finding of Deschutes County it is in the public interest to do so. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.