This is a service / maintenance or supply contract in Ottawa, Ontario. Contact the soliciting agency for additional information.

The period of contract shall commence on 01 April 2025 and shall end on 31 March 2026. The Contractor shall perform required inspections, repairs, and certifications of all system components in accordance with the latest revision, unless otherwise specified and applicable parts of the referenced publications will become part of this specification as if fully included: Ontario Ministry of Labour requirements as set out in the Occupational Health and Safety Act and Regulations for Industrial Establishments, R.R.O. 1990, Reg.851 as amended by O. Reg. 516/92, O. Reg 630/94, O.Reg. 230/95 and O.Reg.450/97. ANSI-American National Standards Institute. EEMAC - Electrical and Electronic Manufacturers Association of Canada ASTM - American Society for Testing and Materials CSA Standard B167-08, Safety Standard for Maintenance and Inspection of Overhead Cranes, Gantry Cranes, Monorails, Hoists, and Trolleys. CSA Standard Z259.12-11, Safety Standard for Fall Protection CSA Standard Z259.2.2-14, Safety Standard for Self-Retracting Devices Manufacturer's recommended maintenance schedule as provided by the City of Ottawa Over Head Lifting Equipment inspection services will take place at OC Transpo facilities located at 1500 St. Laurent Boulevard, 755 Industrial Avenue, 2550 Queensview Drive, 164 Colonnade Road. Fall Arrest Rail inspection services will take place at OC Transpo facilities located at 1500 St. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform. Question Acceptance Deadline: 2025/03/17 11:59:00 PM EDT