Renovation of a detention facility in Carson City, Michigan. Completed plans call for the renovation of a detention facility.

**As of April 21, 2025 this project has not yet been awarded. A timeline for the award has not yet been established.** (Dept. of Corrections ONLY) All contractor/vendor representatives attending a Pre-Bid Walk Through Meeting must submit a Vendor/Contractor LEIN Request five business days prior to the meeting date, (See the attached Vendor/Contractor LEIN Request form). Send the LEIN Request form, filled out and signed, by email to Daniel T. Smith at email address: SmithD76@michigan.gov. The email "Subject" must include (Facility Name, Project Name, Date & Time of Pre-Bid Walk Through Meeting). An individual is only permitted to represent one bidder at a mandatory walk-through. Question Deadline 03/14/2025 at 3:00 PM ET Please do not submit online questions via SIGMA VSS. ALL questions should be emailed to Bret Emerson at bids@commtechdesign.com. Contractors should only submit a maximum of two (2) attachments (both being less than 6 MB) for bid responses. One attachment is to be bid documents (Bid Summary, Bid Schedule, Bid Bond, Certification forms, Signature Authority, etc.) and if applicable, the other attachment should be Qualified D. Bid Security: 5%. Question Deadline - 03/14/2025 at 3:00 PM E - Please do not submit online questions via SIGMA VSS. ALL questions should be emailed to Bret Emerson at bids@commtechdesign.com. o The MDOC is obtaining a new WIFI cabling system and installation and connection of owner provided Wireless Network equipment. o The scope of this project is the provision and installation of the cabling, raceway and systems as described below, on the drawings and in the detailed specifications. o Electrical Power o Systems Grounding o Wireless network equipment shall include o WIFI cabling scope shall include but not be limited to o Provide new raceways inside and outside building to route CAT-6A cables and fibber cable between buildings. See drawings and specs for raceway requirements. o Install fibber cabling between the Admin and the buildings noted. Contractor shall terminate and test all fibber cables. o The contract shall include the installation and connection of Wireless network equipment. Work shall include o Provide and install CAT-6A patch cords at each WAP. See specifications for types and lengths required. o Verify connectivity lights on all WAPS after the owner installs the Ethernet Switches. o Label WAP patch panels with the WAP number as shown in the drawings and specifications. o The owners (and their Cisco Partner) work on the WIFI network equipment includes.