Site work and paving for a mixed-use development in Corcoran, Minnesota. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

**As of May 06, 2025, the project was awarded to Asphalt Surface Technologies Corp (Astech Corp), with an awarded amount of $261,895.41.** The work, in accordance with Drawings and Specifications prepared by Stantec Consulting Services Inc., consists of the following major items of work and approximate quantities: 840 Square Yards Mill Bituminous Pavement 1,450 Square Yard Geotextile Fabric, Type V Non-Woven 40 Tons Select Granular Borrow Mod 8% (CV) 810 Tons Aggregate Base, Class 5 760 Tons Bituminous Pavement 120 Lineal Feet Curb and Gutter 112 Square Feet Concrete Sidewalk 55 Lineal Feet Storm Sewer Pipe 3,600 Lineal Feet Pavement Markings Together with selective demolition, traffic control, erosion controls, seeding, and other related appurtenances. All plan holders who order electronic proposals through online will receive addenda as they are released; however, it is the Contractor's full responsibility to ensure they have received all addenda prior to the submittal of bids. Question Deadline 04/09/2025 Direct inquiries to Steve Hegland at (763) 479-4237 or steven.hegland@stantec.com or Nick Wyers at (763) 479-5174 or nick.wyers@stantec.com. No oral interpretation will be made to any bidder as to the meaning of the Specification or of the Drawings incorporated therein by reference or otherwise. Every request for such an interpretation shall be made in writing to: Steve Hegland, P.E. Stantec Consulting Services Inc. One Carlson Parkway North Suite 100 Plymouth, Minnesota 55447 Email: steven.hegland@stantec.com Or Nick Wyers, P.E. Email: nick.wyers@stantec.com Any inquiry received five (5) or more calendar days The intent of the Contract Documents is to prescribe a complete project of work or improvement. The Contract shall be based upon and include by reference the Contract Documents, and all addenda as herewith provided; all bids must be based upon a full compliance of the Contract Documents. Should there be some item or items not shown on the Drawings or described in the Specifications which are required for the Work, these items and the furnishing of all related labor, materials and equipment shall be considered incidental to the Work and no additional compensation will be provided