Renovation of a municipal facility in Hillsville, Virginia. Completed plans call for the renovation of a 35,900-square-foot municipal facility.

Installation of Roof System. Reference-Twin County ESS Building at 494 Industrial Park Road, Hillsville, VA approx. 35,900 sq. ft. of Roof Area REQUIRED system with 20-year warranty. Mount Rogers Community Services is currently soliciting bids for roof system at Smyth ESS Building located at 494 INDUSTRIAL PARK DRIVE, HILLSVILLE, VA 24343. All Inquiries for Information Should Be Directed To: korey.kennedy@mountrogers.org Phone: (276) 239-0064____ Sections 1 and 2: o Furnish and Install Expanded Polystyrene Insulation board between raised flutes of metal panel roof system. o Mechanically attach 1" ISO Insulation cover board over EPS flute filler to provide a smooth rigid roof surface. o Mechanically attach single ply TPO roofing membrane per manufacturer's recommendations. o To Include a roof system manufacturer's 20 year no dollar limit. labor and material warranty. Install wood blocking as required at the eaves and rakes. o On Section 1 terminate at rake perimeter with 24ga prepainted metal gravel stop with continuous 22ga galvanized cleat. o On Section 1 terminate at the gutter edge with 24ga prepainted 11netal drip edge. o On Section 2 Install membrane up and over the parapet wall. o Fabricate and install new 24ga prepainted metal coping with continuous 22ga galvanized cleat. o Flash all walls, pipes, curbs, and other penetrations per roof manufacturer's specifications. o Clean up and remove project related debris. Section 3: o Remove and dispose of existing EPDM membrane and underlying insulation. o Furnish and install Expanded Polystyrene insulation board between raised flutes of metal panel roof system. o Mechanically attach 1" ISO insulation cover board over EPS flute filler to provide a smooth rigid roof surface. o Mechanically attach single ply TPO roofing membrane per manufacturer's recommendations. o To include a roof system manufacturer's 20-year-old no dollar limit, labor and material warranty. Install wood blocking as required at the eaves. o Terminate at the gutter edge with 24ga prepainted metal drip edge. o Install membrane up and over the parapet walls. o Fabricate and install new 24ga prepainted metal coping with continuous 22ga galvanized cleat. o Flash all walls, pipes, curbs, and other penetrations per roof manufacturer's specifications. Clean up and remove project related debris.