Site work and paving for a mixed-use development in Waseca, Minnesota. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; sidewalk / parking lot; and water / sewer project.

Salvage and Reinstall Fence Lin Ft 320 6" Pvc Watermain (Horizontal Directonally Drilled) Lin Ft 1,430 Hydrant Each 1 6" Gate Valve and Box Each 3 Reconstruction Hdpe Water Service Each 28 Bituminous Pavement Reconstruction Sq Yd 65 Concrete Curb & Gutter Lin Ft 20 Turf Restoration (Hydro-seed & Mulch) Sq Yd 2950 Shrub Plantings Each 75 Along With Miscellaneous utility and roadway improvements, removals, and restoration. On Contracts with Disadvantaged Business Enterprise (DBE), Targeted Group Business (TGB), or Veteran-Owned Small Business(VET) established goals, or any combination thereof, the Contractors organization shall perform Work amounting to not less than thirty percent (30%) of the total original Contract Amount. The City will deduct specialty items from the total original Contract Amount before calculating the amount of Work that the Contractor shall perform. Polyethylene Water service pipe 3/4 inch to 2-inch and conforming to the requirements of AWWA C901 and the following: 1. Tubing shall conform to the outside-diameter dimensions of copper tubing (CTS) 3/4 inch though 2-inch. 2. A minimum pressure class of 250 psi. 3. Tubing shall have a standard dimension ration of 9 (SDR 9). 4. Products shall be manufactured from high molecular weight polyethylene grade P.E. 4710 CTS. 5. Tubing to be used with Stainless Steel stiffening inserts and compression fittings. 6. Spliced or kinked tubing shall not be used. 7. No bends shall be permitted closer than 10 diameters from any fitting or valve. 8. Product shall be certified as suitable for contact with drinking water by an accredited certification organization in accordance with ANSI/NSF Standard 61, Drinking Water Systems Components-Health Effects. 9. Marking on tubing shall include: Nominal size, standard PE code designation (PE 4710), AWWA pressure class (PC 200), AWWA standard (C901), manufacture's name or trademark and production record code, and seal or mark, of the testing agency that certified the suitability of the pipe or tubing material for potable water products. Direct any inquiries to Joseph Palen, Project Engineer, at (507) 529-6036. On Contracts with Disadvantaged Business Enterprise (DBE), Targeted Group Business (TGB), or Veteran-Owned Small Business(VET) established goals, or any combination thereof, the Contractors organization shall perform Work amounting to not less than thirty percent (30%) of the total original Contract Amount. The City will deduct specialty items from the total original Contract Amount before calculating the amount of Work that the Contractor shall perform.