Demolition and renovation of a mixed-use development in Cleveland, Ohio. Completed plans call for the demolition of a educational facility; for the renovation of a educational facility; water / sewer project; and water / sewer project.

Submit all questions regarding this RFQ in writing to Matt O'Donnell at Matthew.ODonnell2@tri-c.edu with the Tri-C project number included in the subject line (no phone calls please). Project Description The Western Campus Heating and Cooling Replacement Project consists of two components: 1) Demolition and removal of the existing steam boiler system and replacing with a new hot water boiler system, 2) Demolition and removal of the existing chillers and replacing with new chillers with all associated pumps and piping. Boiler replacement is anticipated to take place during the summer of 2026 and chiller replacement is anticipated to take place during the fall/winter of 2026/2027. The project scope details include but are not limited to the following: new energy efficient boilers, chillers, domestic hot water, pumps, piping, dynamic controls, metering, operating software providing improved control management and integration into the "Tridium" Building Automation System. The new boiler system shall provide sufficient heating using the "Connected Load" calculation to allow for variable demand. Sizing of existing heating coils shall be verified by the A/E to determine whether these existing coils can be used in the new system. Coil sizing will be critical in all aspects of the project, particularly when converting from steam heat to hot water. Coil sizing changes identified during the design process shall be brought to the attention of Tri-C immediately to assess the magnitude of the associated scope change. Scope of Services The selected Construction Manager at Risk ("CMr"), as a portion of its required Scope of Services and prior to submitting its proposal, will discuss and clarify with the Owner, the breakdown of the Agreement detailed cost components, to address the Owner's project requirements and refine the project schedule.