Site work and paving for a road / highway in Monroe, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

4.78 mi of hot mix asphalt cold milling, shoulder paving and resurfacing, trenching, aggregate shoulders and pavement markings on East Lloyd Road from Dixon Road to the south village limit of Dundee, Bluebush Road from Steffas Road, Plank Road from US-23 to Sherman Road and Cone Road from Wabash Road to Ann Arbor Road, Monroe County. This is a Local Agency project. Question Deadline 07/04/2025 All inquiries concerning the plans and proposal for this project are to be directed to: Brian Chomas MDOT-eProposal@Michigan.gov All inquiries must be made by E-mail through the electronic proposal system To be able to process and distribute an addendum, if required, all inquiries shall be made at least seven (7) calendar days before the letting. Net classification required for this project is 1286 Cb Control Sec Job No Federal No STL 58000 222768A 25A0671 STL 58000 222769A 25A0672 STL 58000 222771A 25A0673 STL 58000 223059A 25A0674 4% DBE Participation Required. Completion Date: 7/3/2026 MIDOT - 2507 034 - Hot Mix Asphalt Cold Milling, Shoulder Paving and Resurfacing, Trenching, Aggregate Shoulders and Pavement Markings 58000-222768 STL 58000 222768A 25A0671 58000-222768 STL 58000 223059A 25A0674 58000-222768 STL 58000 222769A 25A0672 58000-222768 STL 58000 222771A 25A0673 QA 07/07/2025: e cold milling on Plank Road will be limited to two areas: from Station 45+30 to Station 51+23 at the north end of the project, and at the entrance to the former Ford plant at Station 55+42. The quantity shown in the log (3,950 Syd) is correct and reflects only these locations. The typical sections and details shown on pages 125 through 127 of the proposal are incorrect and will be revised in an upcoming addendum to remove the references to cold milling outside of these specified areas.