Site work and paving for a road / highway in Mount Holly, Vermont. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Base Bid - Portion of Hortonville Rd -5,420 lf - Asphalt Paving From Shrewsbury Town line (at end of existing asphalt) to a point at the VELCO ROW(at end of existing asphalt). This section of roadway was previously reclaimed in 2021 and is gravel surface. See attached maps (page 4 & 5) for limits. Alternate 1 - Hortonville and Shunpike Rd Intersection - 10,800 sf - Shim and Overlay Paving At the intersection of Hortonville Road and Shunpike Road to the limits shown on the attached map (page 4 & 6) Locations: The Town of Mount Holly is seeking bids from qualifi ed contractors to perform: Base Bid - Portion of Hortonville Rd -5,420 lf - Asphalt Paving From Shrewsbury Town line (at end of existing asphalt) to a point at the VELCO ROW(at end of existing asphalt). This section of roadway was prev iously reclaimed in 2021 and is gravel surface. See attached maps (page 4 & 5) for limits. Base Bid - Item 01 - Portion of Hortonville Rd - Grading - Lump Sum o Utilize roadway grade to grade to provide positive dr aining asphalt road. Any additional gravel needed will be provided and delivered by the To wn. o Match into any existing driveways and roadways (Perry and Windy Hill) o Compact with vibratory roller o Provide stepped milled transition to existing roadway pavements. Base Bid - Item 02 - Portion of Shunpike Road - Asphalt Paving - Ton o Apply emulsion tack coat prior on stepped mill trans itions. o Install 2 1/2 " base course of Type II VTrans Approved Hot Mix o Install 1 1/2 " top course of Type III VTrans Approved Hot Mix o The estimated quantity of asphalt paving is 3030 ton s. o All driveways to have a two-foot paved apron (paved driveways to be milled for smooth transition prior to overlay). o Mill transitions for butt joints when tying into existing roads. Base Bid - Item 03 - Portion of Shunpike Road - Shoulder Gravel - Cubic Yard o Install shoulder gravel as needed along roadway edges and drives. o Approximately 270 cy. Alternate 1 - Hortonville and Shunpike Rd Intersection - 10,800 sf - Shim and Overlay Paving At the intersection of Hortonville Road and Shunpike Road to the limits shown on the attached map Item A-01 - Portion of Shunpike Road - Asphalt Paving = Ton o Apply emulsion tack coat prior on stepped mill trans itions. o Install 1 1/4 " shim/leveling course of Type IV Marshall Mix to correct road profile deficiencies and 3/4" overlay of Type IV Marshall Mix - Estimated 160 tons o All driveways to have a two-foot paved apron (paved driveways to be milled for smooth transition prior to overlay). o Mill transitions for butt joints when tying into existing roads. Item A-02 - Portion of Shunpike Road - Shoulder Gravel - Cubic Yard o Install shoulder gravel as needed along roadway edges and drives. o Approximately 20 cy