Renovation of a municipal facility in Greenville, North Carolina. Completed plans call for the renovation of a municipal facility.

The City of Greenville, NC is requesting proposals for the "City Hall East Wing Roof Coating" located at the 200 W. 5th St., Greenville, NC 27834. The scope of work shall include but is not limited to cleaning, prepping, and coating the existing Verisco TPO roof membrane on the City Hall East Wing with a fluid applied, high silicone coating compatible with the manufacturer's specifications. This is a turn-key project, and all labor, material, and equipment shall be provided. Any method of submitting must state and shall have the words Bid Enclosed, City Hall East Wing Roof Coating Attn: Ross Peterson along with the company name in the subject line or on the outside of the envelope. No bid may be changed or withdrawn after the time of the opening. Any modifications or withdrawals requested before this time shall be acceptable only when such a request in writing is made to Ross Peterson, Project Management. The City of Greenville reserves the right to reject any or all bids, waive any informality and award contracts that appear to be in its best interest. The right is reserved to hold any or all proposals for a period of sixty (60) days from the bid opening thereof. Questions regarding any procedure for submission of a proposal for the City Hall East Wing Roof Coating shall be directed by email to Ross Peterson, Project Management, @ rpeterson@greenvillenc.gov. Questions shall be submitted by 5:00 PM, Tuesday, September 2, 2025. The contractor will have 30 consecutive working days to complete the project. The scope of work shall include, but is not limited to: 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 The contractor will have 30 consecutive working days to complete the project. The Contractor shall provide all labor, equipment, materials and insurance necessary. Replace any deteriorated or wet insulation per Owner-provided, third-party thermal scan. Price as separate line item, per board foot. Clean specified roof surface with a minimum 3000 psi pressure washer to remove all grease/oils, mold/mildew, dirt/dust and foreign objects that would prevent proper adhesion of applied coating. Remaining debris shall be removed by broom or vacuum. Any chemicals used shall be compatible with the existing Verisco TPO membrane and be approved by owner before use. Perform adhesion test to manufacturer's specification. Make necessary repairs to the existing roof membrane as required by the manufacturer. Prepare all seams, flashings, penetrations and transitions to manufacturer's specifications. Seal fresh air intakes into the building with traps or heavy plastic sheeting prior to application of roof coating. Coordinate with Owner for location of intakes and scheduling. Building should be assumed to be occupied at all times. Protect all surfaces not to be coated. All spills, splatters, drips, etc. shall be cleaned up immediately. Furnish and apply a fluid applied, high solid silicone roof coating the specified surface by means of roller application to manufacturer's specification during correct weather conditions. Contractor is responsible for all damage caused by work during performance of scope of work. All areas of work shall maintain a safe working zone and cleaned up daily. All generated debris shall be removed from the worksite and disposed of properly upon completion. Provide a fifteen (15 year) manufacturer's system warranty on material and two (2) year labor warranty. Manufacturer shall sign off on warranty. After completion, the owner and contractor will perform a walk through to determine punch list items. Any punch list items shall be addressed within a week. Provide close out documents to include warranty and manuals. 1.16 Unit pricing for insulation replacement per Sq. Ft. pricing.