Site work for a mixed-use development in Huntley, Illinois. Completed plans call for site work for a golf course; and water / sewer project.

Irrigation Pump Refurbishment At Pinecrest Golf Course The Park District has determined that the Illinois Prevailing Wage Act applies to this work and therefore Contractor shall comply with the Illinois Prevailing Wage Act and shall pay, and require every Subcontractor to pay, the prevailing rates of wages as established by the Illinois Department of Labor for each craft or type of work needed to execute the contract in accordance with 820 ILCS 130/.01 et seq. The Huntley Park District reserves the right to determine, in its sole discretion, whether the proposal, in its judgment, meets the needs or purposes intended. The Park District further reserves the right to reject any or all bids and to waive any formality, technicality, or irregularity in any proposal. Wesley Peete, Director of Parks and Facilities 1. Pump Removal: Separate 50 hp. motor from pump, use a 30 ft. spider crane, excavator, or similar with proper rigging for removal of the Vertical Turbine Pump through one Sky Window. 2. Pump Teardown: Disassemble the pump for thorough inspection; to include shafting, couplings, bushings/bearings, impellers, strainer basket, column piping, etc. 3. Cleaning and Sandblasting: Clean all pump components and prepare them for inspection. 4. Inspection: Check the dimensional integrity of all significant parts, assess the straightness of the shaft, and evaluate the clearance for the column and bowl bearings. 5. Repair Report: A comprehensive repair report will be created, documenting the disassembly process, parts replacement, modifications made, and the reassembly of the pump. 6. Repairs: Repair or replace the line shaft and pump bowl bearings as necessary. 7. Packing Replacement: Install new packing, and field adjust. 8. Pump Installation: Lift and lower the pump into place through skylight with a 30 ft. spider crane, excavator. Install new flange gaskets and bolts. Grease motor/bearings. 9. Provide Initial Startup: Check proper wiring, verify motor rotation, pump (run) amperage, pump-down time, etc.