Demolition and site work for a water / sewer project in Milwaukee, Wisconsin. Completed plans call for the demolition of a water / sewer project; and for site work for a water / sewer project.

The Owner has established a system of minimum participation goals for construction contracts of 20% for SBEs. Question Deadline 04/28/2026 All questions related to this proposed Contract, pre-bid presentation, site tour, or interested Bidders list must be directed in writing to Nathan Churchill at nchurchill@mmsd.com no later than seven days before the Bid opening date. The project contemplated consists of replacing several pieces of equipment critical to the operation of two sewer system diversion chamber sites located at the intersection of S. 6th St. and W. Oklahoma Ave. in Milwaukee, WI. The project consists of removing the existing equipment and purchasing, installing, and commissioning new equipment. Complete details can be found in the Invitation to Bid and Plans and Specifications sections of the bid documents. MMSD Site DC0103 (Located on the east side of S 6th St.) Contractor shall o Replace 60KW natural gas generator and automatic transfer switch o Natural gas line pressure regulator and protective line set cover o Feeder cables and control wiring o Replace two power distribution panels o Replace hydraulic power unit (HPU) o Reuse existing hydraulic cables connected to gate cylinders o Reuse existing gate cylinders o Replace accumulator bank o Replace local control panel for bypass slide gate (LCP-1) o Replace local control panel for slide gates 1 and 2 (LCP-2) o Replace ventilation system blower and corroded discharge duct o Replace enclosure for RTU panel o Extend exterior ventilation ductwork o Replace conduit sealing fittings and wiring o Remove phone connection panel and conduit o Apply concrete sealant to locations indicated MMSD Site DC0603 (Located on the west side of S 6 th St.) Contractor shall: o Replace RTU/local control panel DC0603 and contents o Replace adjacent panel enclosure o Replace adjacent junction box o Replace conduit sealing fittings and wiring o Install additional air-gap wiring enclosures on structure Other work as described in the Specifications and as necessary to complete the project