Site work for a civil project in Powell River, British Columbia. Completed plans call for site work for a bridge / tunnel; road / highway; and water / sewer project.

BCTS BC Bid Solicitation Standard 9,658.70 lineal meters of compacted well-graded 25mm minus surfacing materials with culvert and ditch-line cleaning on Lois Forest Service Road system. Pre-grade and shape of application areas to enhance bonding of new surfacing materials with existing roadway. Supply, load, haul, place, grade and compaction of well graded crushed gravel aggregate meeting 25mm minus Well Graded Base Course Aggregate (WGB) aggregate specifications on 9,648.70 lineal meters of FSR as per attached schedules and specifications. Clean all existing ditches to a minimum depth of 75 centimeters deep by 1 meter wide, including re-establishment / cleaning of all culvert inlet sumps and outlets. The result will be a well-drained road system. All ditch-line and culvert cleaning to be completed prior to surfacing operations. Final grade to be compacted to a 15-centimeter depth and shall be free from organic matter or other deleterious materials. Oversize materials that cannot be accommodated in the layer shall be removed at the source or on the road and shall be disposed of as directed by the Ministry Representative. All crushed granular surfacing material used on this project must be a well gradated crushed aggregate and must conform to the Ministry of Transportation and Highways “STANDARD SPECIFICATIONS FOR HIGHWAY CONSTRUCTION 2001 (VOLUME 1 OF 2)” TABLE 202 – C (Appendix #3) WELL GRADED BASE COURSE AGGREGATE - 25MM (crushed gravel having a minimum three fresh fractured faces). Aggregate is to be non-acid producing. See the “Schedule C - Project Specifications” for specific works required. Documents can be obtained from www.bcbid.gov.bc.ca