Renovation of an educational facility in Fairmont, West Virginia. Completed plans call for the renovation of a educational facility.

the purchase and retrofitting of an LED Sign comparable to a Watchfire Signs W-Series Model: W 10mm W Marion County Schools reserves the right to reject any and/or all proposals, to reject or accept any and/or all items in a proposal, and to award the contract in whole or in part as deemed to be in the best interest of Marion County Schools. LED Display A. Cabinet Construction 1. Cabinet dimensions shall not exceed (3') high by (7') wide. The front-to-back cabinet depth shall not exceed 8 inches. 2. The cabinet shall contain a full LED matrix measuring a minimum of (90) pixel rows high by (210) pixel columns wide. 3. Display configuration is twin view, two sided display 4. The distance from the center of one line or column of pixels to the center of all adjacent lines or columns shall be Line Spacing 10.16mm both horizontally and vertically. 5. Maximum display power per face shall not exceed (26) Amps when 100% of the pixels are operating at their maximum possible drive current. 6. Display shall operate from the following power sources: 120/240 VAC, 60 Hz single-phase, including neutral and earth ground. 7. Display shall operate in a minimum ambient temperature range of -40 to +140F (-40 to +60C) and to a 95% humidity. 8. Internal display component hardware (nuts, bolts, screws, standoffs, rivets, fasteners, etc.) shall be fabricated from stainless steel, aluminum, nylon, or other durable corrosion-resistant materials suitable for the signage application. 9. Module components shall be 100% solid-state. 10. Display performance may not cause harmful radio, magnetic or electromagnetic interference. The display must accept any interference received, including interferences that may cause undesired operation. B. Housing Frame 1. Display materials shall use non-corrosive materials or have a protective coating so they shall be anti-corrosive and not degrade or oxidize. 2. Cabinets must be constructed from extruded aluminum with precision-mitered corners, solid welds, and stainless fasteners. 3. The display shall be front or rear ventilated with adequate ventilation provided by the use of fans.