Renovation of a municipal facility in New Buffalo, Michigan. Completed plans call for the renovation of a municipal facility.

Transportation Building Reroofing Shingle Roof Scope of Work Included: 1) Remove shingles. 2) Remove ridge cap, drip edge, flashing, and exhaust caps. 3) Replace deteriorated decking (amount to be included in bid) 4) Install ice & water shield. 5) Install synthetic underlayment. 6) Install new drip edge. Owner to confirm color. 7) Install new ridge cap, flashing, and exhaust caps. 8) Install new architectural shingles. Owner to confirm color. 9) Provide manufacturer's warranty (GAF HDZ) 40-year/25-year non prorated labor and material warranty. 10-year warranty on workmanship. Unlimited wind warranty covered for 15 years. 25-year algae warranty. 10) Remove and properly dispose of all debris generated by this scope of work Removing Shingles: Removal of the existing shingles down to the roof decking, clean up, and dispose of all debris. Magnets are used to pick up nails on the ground and in the driveway. Crew will make sure roof is watertight at the end of each day Rotten Deck Tear Off and Replacement: Minimum amount deck replacement should be include. If any additional rotten or deteriorated roof deck is discovered during construction, it will be removed and replaced. Documentation of the exact quantity of replacement, if any, and will perform the work on a time and materials basis. Ice and Water Shield: Two rows (6') of Ice and Water Shield will be installed at the eaves and one row (3') will be installed at any valleys, chimneys, or protrusions in the roof to help prevent water from leaking into your building Underlayment: High-performance synthetic underlayment shall be installed on the deck above the Ice and Water Shield to provide additional protection for the building from wind driven rain, and to resist wrinkling and tearing from fasteners. Drip Edge: Drip Edge is the metal that sheds water off the edge of the roof and away from the fascia. Removal of existing and install new non-rusting aluminum drip edge with a standard finish. Ridge Cap, Flashing, and Exhaust Caps: Removal of existing and install new ridge cap, flashing, and exhaust caps. Roof System Installation: Installation of shingles at or exceeding the manufacturer's specifications to ensure that roof qualifies for the manufacturer's warranty. Shingles: GAF Timberline HDZ Ventilation: Install a continuous ridge vent at the peak of the roof Cleanup: At the end of each workday, the roof and grounds will be cleaned of construction debris and contained. At the end of the project, all refuse will be thoroughly cleaned up and properly disposed of in a dumpster or truck that provided by contractor. Final cleanup will not be considered complete until accepted by the owner's representative. Safety: Complete written safety and Right-to-Know program. MSDS sheets on all the products we use are maintained on every jobsite. Proper fall protection and OSHA safety procedures will be always followed on the roofing project. Insurance Protection: Workmen's Compensation and Liability and Property Damage Insurance in the amount of Five Million Dollars is required.