Renovation of a water / sewer project in Sturgis, Michigan. Completed plans call for the renovation of a water / sewer project.

Reference Number 0000375887 Delivery Point: 130 N. Nottawa St., Sturgis, MI. 49091 Blower Room MCC improvements include demolition of the existing MCC, lighting panel, and transformer and replacement with new combination motor starters for existing loads, new lighting fixtures and panel, and a new transformer. Question Deadline 02/26/2025 at 4:00 PM ET Questions are submitted online No Bid Intent Optional Bid Intent Deadline 02/26/2025 04:00 PM EST Buyer Preferences, Guidelines & Requirements General Requirements - Contractors License Required - Installation Required - Insurance Required Award Requirements - All or None Award Bonding Requirements - Bid Bond 5 % The City of Sturgis reserves the right to accept any bid, reject any or all bids, to waive informalities and make the award in any manner deemed in the best interest of the City of Sturgis. Scope: 1. Contractor shall provide all labor, materials, equipment, and incidentals shown, specified, and required to complete the electrical Work. 2. Contractor shall be responsible for all electrical demolition. 3. Common electrical installation requirements Scope: 1. Contractor shall provide labor, materials, equipment, and incidentals as shown, specified, and required to furnish and install complete grounding for electrical systems, structures, and equipment. Scope: 1. Supports from building structure for electrical items by means of hangers, supports, anchors, sleeves, inserts, seals, and associated fastenings. 2. Contractor shall provide all labor, materials, equipment, and incidentals as shown, specified, and required to furnish and install hangers and supports for electrical systems. 3. Area Classifications: Materials shall be suitable for the area classification(s) shown or indicated on the Drawings, and specified in Section 26 05 05, General Provisions for Electrical Systems. Scope: 1. Contractor shall provide all labor, materials, equipment, and incidentals shown, specified, and required to furnish and install conduit and fittings to form complete, coordinated and grounded raceway systems. 2. Conduit types and the installation methods shall comply with the following, unless otherwise shown or indicated in the Contract Documents: a. Use rigid aluminum conduit for exposed indoor conduit runs in non-corrosive areas. b. Use PVC-coated rigid steel for exposed exterior conduit runs in hazardous, wet, and corrosive locations. c. Use PVC-coated rigid steel conduit for exposed interior conduit runs in hazardous, wet, and corrosive locations.