Renovation of an educational facility in San Luis Obispo, California. Completed plans call for the renovation of a educational facility.

The Work consists ofthe following: renovation ofthe existing 4000 building interior which includes demolition ofmiscellaneous wall hung fumishings/equipment, demolition of existing electrical power fixtures or removal oflight fixture mechanics for conversion to LED type, replacement ofrecessed can lighting with new equipment (accessed from ceiling access panel), replacement of existing receptacles and switches with new, preparation/patching ofgyp board walls for painting, removal and replacement of existing carpet with new carpet tiles and adhesive, replacement ofwall base with new carpet wall base and adhesive, install new vinyl sheet flooring with associated rubber top set base, install new vinyl flooring at Pantry Room with rolled cove base up wall, replacement of Pantry Room countertop and sink (match existing), painting metal window frames surround and sand off any rust or imperfections, remove and replace roller shades at classrooms, remove and reinstall existing shades at other locations after painting, deep cleaning oftile surfaces, painting gyp ceilings, replacement of ceiling tile panels up to 10% of each room floor area, painting of exterior door and window frames, painting ofinterior door and window frames, painting exterior door (both sides). Refer to the plans for the extent of demolition and renovation in each classroom. Reference plans for details and locations. Generally the proposed project consists of modernization of Buildings 4000, 4300, & 6200 finishes including paint, flooring, lighting, ceiling tiles, and accessories. No site work in the scope of this project.