Site work and paving for a road / highway in Robesonia, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Description - Construct Double Bituminous Seal Coat as per online Specification (MS-0340-0005) Contract #2 Item Number -1 Quantity -1375 Unit - SY Description - Select Base Repair 3" 19mm 0-.3 ESALS PG-64-22 Contractor Required to Contact Municipality for Pre-Bid Meeting Bituminous Price Adjustment as Per Pub 408 Section 110.04 Bidders required to be online prequalified for work specified. Proof of Prequalification required with bid submittal. Liquidated damages apply at the rate of $ 800.00 per calendar day. Proposals must be upon the forms furnished by the Municipality. For third class cities the bid must be accompanied by a certified check or bid bond in the amount of 10 % of the bid, made payable to the municipality. For other municipal types it is the discretion of the municipality. A performance bond or certified check in the amount of 100% of the contract shall be furnished by the successful bidder within 20 days after the contract is awarded. The Municipality reserves the right to reject any or all proposals. Construct double bituminous seal coat application. PennDOT approved design required as per pub 447 MS-0340-0005 attached.. Seal coat design to be based on: #8 stone 1.0% loss by wash cover aggregate to be #9m 1.2% lbw, less than 200 ADT, condition of existing surface category (c) Slightly pocked, porous, and oxidized surface, CRS-2PM (E-3M) jEmulsion. All workmanship and materials to be in compliance with PennDOT Publication 408, Section 470 & PUB 447 MS-0340-0005. Proof of PennDOT calibration of chipper and distributor required. Enough rubber tire rollers required to cover seal coat application in a jingle pass