Site work and paving for a road / highway in Bloomer, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Town Board of the Town of Bloomer, Chippewa County, Wisconsin will be accepting road bids for Chip Seal. Roads will be marked. Quote price perton, tonnage, and total cost.Chip Seal on 245th Ave. approx. 4224 ft going East from the intersection of AA to 137th St.Chip Seal on 226th Ave approx. 8448 ft going East from AA to 150th St.oChip Seal on 85th St. approx. 5280 ft going North from 190th Ave to State o Hwy 64.Road will be marked. For the roads to be chip seal coated, cracks larger than 1/4-inch are to be filled, patch localized-problem areas, sweep before applying liquid asphalt, and sweep after rolling aggregate to remove excess aggregate. Road surface must be dry before application, no rain predicted during application or setting time, humidity must be less than 75%. Aggregate size must be 3/8 granite chips and asphalt application rate must be included in the bid. You may contact Gary Nehring at 715-226-8243 or by email at tobchairman@yahoo.com for information and any questions bidders may have.Proof of insurance is required. Contractor must comply with all State and Federal Air and Water Quality Standards. All contractors are responsible for traffic control during their project. The town board reserves the right to reject any and all bids submitted. The town board will accept the bid most beneficial to the town.The contractor(s) shall notify Gary Nehring 24 hours prior to the start of any work at (715) 226-8243 or by email at tobchairman@yahoo.com.