Demolition, site work and asbestos abatement for a mixed-use development in North Waltham, Massachusetts. Completed plans call for the demolition of a educational facility; for site work for a educational facility; for asbestos abatement for a educational facility; and playground / park / athletic field.

Abatement and Demolition of Various City Buildings, 2025 - General 1. Mobilization; 2. Removal and demolition of un-regulated materials; 3. Asbestos and hazardous materials removal; 4. Building Demolition; 5. Site work; 6. Demobilization Questions and requests for interpretations may be submitted in writing by Bidders via e-mail ONLY to cphilpott@city.waltham.ma.us until: Monday June 2nd, 2025 at Noon, 12:00PM To be given consideration, all general bids and a by a copy of the Bidders DCAMM Certificate of Eligibility (DCPO Form CQ7) and a DCAMM Update Statement (DCPO Form CQ3). Each general bid, and each sub-bid shall be accompanied by a bid deposit in the form of a bid bond, certified check, or a treasurers or cashiers check issued by a responsible bank or trust company, payable to the City of Waltham in the amount of five percent (5%) of the value of the bid. Performance and Labor and Materials payment bonds in the 100% full amount of the contract price will be required from the successful bidder. the Contractor shall be charged Five Hundred Dollars ($500.00) per day to pay for consulting and testing fees required to manage and arrange for the completion of the project. The work of the Contract shall be Substantially Complete in 90 calendar days after the date of the Notice-to-Proceed. The Awarding Authority reserves the right to reject any or all general bids, The following is the General Scope of Work, at a minimum, required to be performed by the Contractor for asbestos abatement work in each of the work areas identified below. The Contractor shall adhere to the Scope of Work outlined below as well as any additional requirements stated herein. 1. Work area preparation, including pre-cleaning, installation of critical barriers and polyethylene sheeting, construction of decontamination facilities, work area enclosures, sealing, isolation, and other activities as directed by the Consultant or the Owner. 2. Work area preparations for each location in accordance applicable sections of MassDLS 454 CMR 28.00 and MassDEP 310 CMR 7.15 regulations. 3. Full containment removal, installation, and operation of High Efficiency Particulate Air (HEPA) filtration units sufficient to achieve a minimum of four to six air changes per hour in each containment (where full containment removal is utilized). The exact locations of HEPA filtration units, decontamination units, and other stationary equipment shall be coordinated with other contractors, Owner, and the Consultant. 4. Removal and disposal of all specified ACM, ACWM, asbestos contaminated materials and non-asbestos containing materials as specified above. 5. Pre-cleaning of all debris, as necessary, in all work areas prior to abatement. 6. Furnishing of all labor, materials, equipment, insurance, and services required for all work included in this specification. 7. Compliance with all applicable federal, state, and local regulations, as well as all requirements set forth in these specifications. 8. Decontamination, teardown, and clean up following abatement activities. 9. Performance of any other work or activities required by this specification, applicable regulations, or as necessary to perform a complete job to the satisfaction of the Owner, and Consultant.