Renovation of an educational facility in San Bruno, California. Completed plans call for the renovation of a educational facility.

The Work generally consists of provide all labor, materials, and equipment to remove 56 existing push button door actuators, furnish and install 52 new push-button door actuators, furnish and install 2 Pull bars, 2 push plates, and 2 kick plates at 2 restrooms, and furnish and install 1 new automatic double door operator at Skyline College, building 3 . Online Q&A Q&A Deadline - 08/08/2025 4:00 PM (PDT) - Bidders must direct all questions about the meaning or intent of Bidding Documents to District Representative in writing and must be submitted electronically by posting same to the District's Online Vendor Portal (PlanetBids) . A. Work comprises the campus-wide door push plates ADA mitigation by replacing them with new vertical surface-mounted ADA push button door actuators, at Skyline College, San Bruno, California 94066. B. Furnish all labor, materials, equipment, services, permits, temporary control, and construction facilities, and all general conditions, seismic requirements, general requirements, and incidentals required to complete the Work in its entirety as described in the Contract Documents. The Work includes, but is not necessarily limited to, the following: 1. Removal of 56 existing campus-wide surface-mounted push button door actuators. 2. Furnish and install 52 new push-button door actuators. 3. Furnish and install 2 Pull bars, 2 push plates, and 2 kick plates at 2 restroom doors at Mechanical Center (Bldg. 9). 4. Furnish and install 1 new automatic door operator at Skyline College building 3. (Alternate) 5. Cutting and patching if needed (see section 01 73 29). 6. Coordination with other contractors working at the site and its Subcontractors, coordination with local utility owners and the District, obtaining necessary permits and complying with permit and environmental conditions, project startup and testing, site restoration and cleanup. C. The Work of this Contract comprises construction of all the Work indicated, described in the Specifications, or otherwise required by the Contract Documents. D. Unless provided otherwise in the Contract Documents, all risk of loss to Work covered by Contract Documents shall rest with Contractor until Final Acceptance of the Work. E. Contractor's use of the premises for Work and storage is limited to the area indicated. F. Contractor shall be solely responsible for all utilities (including without limitation electricity, water, gas, etc.) at the Site. G. Contractor shall carefully remove, in a manner to prevent damage, all materials and equipment specified or indicated to be salvaged and reused or to remain the property of District. Contractor shall store and protect salvaged items specified or indicated to be reused in the Work. a. Contractor may furnish and install new items instead of those specified or indicated to be salvaged and reused, in which case such removed items will become Contractor's property. H. Existing materials and equipment removed by Contractor shall not be reused in the Work, except where so specified or indicated. I. Salvaged items not to be reused in the Work, but to remain District's property, shall be delivered by Contractor in good condition to District at the Facilities Maintenance Center, 3300 College Drive, San Bruno. a. Any items specified or indicated to be salvaged which are damaged in removal, storage, or handling through carelessness or improper procedures shall be replaced by Contractor in kind or with new items. Alternates: Alternates are defined as products, materials, equipment, systems, methods, units of work or major elements of the construction, which may, at District's option and under the terms established by the Contract Documents, be selected for the Work in lieu of other requirements of the Contract Documents. Selection may occur prior to commencement of Contract Time, or District may defer for possible selection in the future within thirty calendar days after the commencement of Contract Time. Include as part of each Alternate, miscellaneous devices, accessory objects, and similar items incidental to or required for a complete installation whether or not indicated as part of alternate. Unless otherwise specifically provided, the work described in Alternates shall be completed with no increase in Contract Time. Refer to the Specifications for the full scope of work in each Alternate. Coordinate related Work and modify surrounding Work as required to integrate the various elements of the alternates in the complete Work, when acceptance is designated in the Contract or added by Change Order. All alternate prices shall include all costs, including insurance, bonds, overhead, and profit. District reserves the right to make decisions on Alternates for Thirty (30) Calendar Days after the commencement of Contract Time. The District reserves the right to adjust the total funds available to complete the Project in order to accept any or all Alternates. Contractor shall hold prices of those Alternates for that time period. Substantial Completion of the entire Work within 90 Days ; Final Completion of the entire Work and be ready for Final Payment in accordance with Section 00 73 00 Supplemental Conditions within 30 Days from the date of acceptance of Substantial Completion to run as provided in Document 00 71 00 (General Conditions). Bid(10.0%), Performance(100.0%), Payment(100.0%), Certified Check