Renovation of a medical facility in Kaneohe, Hawaii. Completed plans call for the renovation of a medical facility.

The Department of Health (DOH), Hawaii State Hospital (HSH), is interested in seeking a contract for the repair of the Fan Coil Unit(s) in building(s) F, H, and I on the grounds of Hawaii State Hospital. 1. Scope of Services Contractor shall remove and replace three (3) existing HP Horizontal Ceiling Concealed fan coil units in Buildings F, H, and I. The new units will be like-in-kind specifications of the existing equipment to ensure seamless integration and optimal performance. Installation and integration into existing HVAC system. Comprehensive testing and commissioning reports for each unit. Direct all questions regarding this Solicitation, and any questions or Issues relating to the accessibility of this Solicitation (Including the appendices and exhibits to this Document, and any other document related to this Solicitation), to: Adams, Troy. Repair Work a) Remove existing Units. Safely disconnect and remove the three existing fan coil units, ensuring that all associated piping, electrical connections, and mounting hardware are properly handled to prevent damage to the surrounding infrastructure. b) Procurement of New Unit(s). Supply three (3) new HP Horizontal Ceiling Concealed fan coil units with the following specification. i) Electrical Requirements 120V/1Ph/60Hz ii) Coil Configuration, Right Hand, 4-row, 5-circuit cooling coil iii) Airflow, High speed at 1, 350 CFM iv) System Type, 2-pipe hydronic v) Materials, Aluminum fins with galvanized steel casing vi) Actuator c) Installation of New Units. Install the new fan coil units in the same locations as the previous units, ensuring proper alignment and secure mounting. Reconnect all piping and electrical connections in compliance with manufacturer guidelines and local buildings codes. d) Integration of 2-way Actuators. Each fan coil unit shall be equipped with a 2-way motorized control valve actuator to regulate the flow of hot or chilled water. The actuators should be compatible with the fan coil units and the building's control systems. e) Testing and Commissioning. After installation, test each unit to verify proper operations, including checking for leaks, verifying airflow rates, and ensuring that all controls function as intended. Adjust settings as necessary to achieve optimal performance. f) Building F, Demolition of Existing Drop Ceiling. Carefully remove the existing drop ceiling tiles and grid system in the areas where the fan coil units are located. Ensure that all electrical fixtures, such as lighting, are safely disconnected and removed prior to ceiling demolition. Properly dispose of all debris and materials resulting from the demolition in accordance with the local regulations. g) Building F, Reinstallation of Drop Ceiling. Install a new drop ceiling grid system and tiles to match the existing ceiling design and aesthetics. Reinstall any electrical fixture that were removed during the demolition process, ensuring they are properly secured and operations. h) Cleanup and Disposal. Remove all debris resulting from the replacement process and dispose of the old units and materials in accordance with local regulations. The Contractor shall provide the services required under the contract from November 3, 2025, to April 1, 2026, unless the contract is sooner terminated.