Site work and paving for a transportation facility in Nanty Glo, Pennsylvania. Completed plans call for site work for a transportation facility.

Base Bid consists of removing and replacing the existing Runway 7-25 lights. All lights will be laid out according to the FAA Advisory Circular 150/5340-30J. The proposed system will include new base mounted light cans, cable, counterpoise, regulator, and ductbanks as required. All existing components for the existing light system will be removed except ductbanks, electrical manholes, and any conduits to the existing electrical vault and or airport guidance signage. Any direct buried cable not impacted by the new system will remain in place and abandoned. The existing electrical vault will be reused with this project. Add Alternate Bid No. 1 consists of removing and replacing the existing runway exit signs and hold signs. The hold signs will be removed from the current taxiway circuit and placed on the runway circuit. All signs are to be installed on existing bases, if proposed signs are to change in size, an extension to the foundation will be installed. Add Alternate Bid No. 2 will result in conduit being installed in the areas of Base Bid, pending if awarded. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. A Non-Mandatory Pre-Bid Meeting will not be held All inquiries shall be submitted on the Bid Question Form provided and directed to the office of the ENGINEER, TranSystems Corporation, to the attention of the Project Coordinator, Aaron D. Sheredy, EIT at adsheredy@gftinc.com.