Site work and paving for a mixed-use development in Jamestown, New York. Completed plans call for site work for a sidewalk / parking lot; for paving for a sidewalk / parking lot; road / highway; and road / highway.

Reference Number 0000351698 The Project consists of modifying and constructing concrete structures such as curbs, gutters, new ADA sidewalk ramps, sidewalks, ADA warning strips, and driveway aprons as part of the total reconstruction of Morton Street within the City of Jamestown. Question Acceptance Deadline 05/16/2024 05:00 PM EDT Questions are submitted online Yes Each proposal must be accompanied by a bid bond in the amount of ten percent (10%) of the total bid price, conditioned that, if the proposal is accepted, the Contractor will enter into a contract for the same, and will execute any such further security as may be required for the faithful performance of the contract. All work is performed at the State of New York Prevailing Wage rates. No bidder may withdraw his bid within 45 days of the date of the receipt of bids. *The right to reject any and all bids, to waiver any inconsistencies in, or to make any award to other than the low bidder, should it be deemed to be in the best interest of the City of Jamestown, and in accordance with the law, are herewith reserved. Scope of Work: 1. Shall excavate to the limits necessary and prepare a compacted subbase with an approved mechanical compactor. 2. Shall obtain and place a maximum of four (4) inches of crushed stone on the compacted subbase to a specified line and grade. 3. Shall include the forming, placement, finishing and curing necessary to install four (4) inch concrete sidewalk or flat work as specified. a. The supplied concrete shall be Standard City of Jamestown Concrete Mix, 611 lbs. cement / cy of concrete with approved admixture, 3" slump, +/- 1 inch. 4. Shall apply a liquid membrane curing compound to all new concrete surfaces in accordance with NYSDOT Standard Specifications. 5. Shall protect work from defects and/or vandalism until all forms and work equipment have been removed. 6. All concrete flatwork shall be edged with a rounded tool of a 1/4 inch radius, including section joints, unless otherwise specified or as directed by the City Engineer. B. Payment: 1. Payment for all work under this Item shall be the cost per square foot of concrete flatwork installed and complete. The Contractor shall complete removal of all forming materials and debris before payment will be made. The unit bid price shall include all labor, materials and equipment necessary to complete the work as specified.