Renovation of an educational facility in Bridgewater, New Jersey. Completed plans call for the renovation of a 30,576-square-foot, two-story above grade educational facility.

The new work generally consists of interior alterations and renovations of classrooms, cafeteria’s and locker rooms including all associated work such as mechanical, electrical and plumbing. ATTENDANCE IS STRONGLY RECOMMENDED and BIDDERS ARE URGED TO COME PREPARED AND WITH AN UNDERSTANDING OF THE DRAWINGS. Following the conference, the Architect may send a written memorandum to all Bidders indicating any addenda and/or clarification items, if required. All technical questions, comments, and inquiries should be directed to Solutions Architecture directly through the BidBox portal. Please log in to your BidBox account and in the Bidder Dashboard select "Submit RFI" under the corresponding project. DO NOT send RFI's to bidding@solutions-arch.com or the info@solutions-arch.com inbox as they will not be responded to; the last day for questions is November 20th, 2025, (2:00 pm EST). Questions received after 2:00 pm will not be responded to. Doc note: Bidders may purchase documents through the site using any major credit card or Paypal. 1. Questions regarding bidding should be directed to the Architect's office. Solutions Architecture Corp. bidding@solutionsarch.com 0: 973.484.4800 f: 201.706.7777 96 Pompton Ave. 2nd Fl. Verona, NJ 07044 Question Deadline 11/25/2025 at 2:00 PM ET Bids shall be made on the Forms of Proposal provided and must be accompanied by bid security in the amount, form and subject to the conditions provided in the Instructions to Bidders. H. Each bidder shall submit with its bid, a Certificate of Consent of Surety as per N.J.S.A. 18A:18A25 from a Surety company stating that it will provide the bidder and all subcontractors, if successful, with a performance/payment bond in the full amount of the contract. The owner reserves the right to reject any or all bids or to waive informality in the bidding if it is in the best interest of the Owner to do so and to award contracts only to those whose proposal is deemed by the Owner to be most advantageous to the interest of the public. cONTRACT DESCRIPTION A. The Contract Documents are prepared in accordance with available information as to existing conditions and locations. If, during construction, conditions are revealed at variance with the Contract Documents, notify the Architect immediately so that supplementary instructions may be issued. B. The Specifications determine the kinds and methods of installation of the various materials, the Drawings establish the quantities, dimensions and details of materials, the schedules on the Drawings give the location, type and extent of the materials. C. Should the Drawings, Specifications or schedules disagree in themselves or with either or both of the others, the better quality or greater quantity of work or materials shall be performed and provided, unless otherwise directed in writing by the Architect. D. Dimensions given on the Drawings govern scale measurements and large scale drawings govern small scale drawings, except as to anything omitted unless such omission is expressly noted on the larger scale drawings. E. The techniques or methods of specifying to record requirements varies throughout text, and may include "prescriptive", "open generic/descriptive", "compliance with standards", "performance", "proprietary", or a combination of these. The method used for specifying one unit of work has no bearing on requirements for another unit of work. F. Whenever a material, article or piece of equipment is referred to in the singular number in the Contract Documents, it shall be the same as referring to it in the plural. As many such materials, articles or pieces of equipment shall be provided as are required to complete the work. G. With the approval of the Architect and without additional cost to the Owner, the Contractor shall make all necessary changes or modifications to locations as may benecessary to suit requirements and conditions at the building and for the proper and conveniently accessible location of all parts of the system. H. Small details not usually shown or specified, but necessary for the proper installation and operation of the work, shall be provided. I. Cap all incomplete lines, ducts, conduits, openings, etc., until ready for final connection, after which they shall be thoroughly cleaned and left unobstructed.