Site work and paving for a civil project in Gouldsboro, Maine. Completed plans call for site work for a bridge / tunnel; road / highway; and for paving for a road / highway.

Culvert replacement, ditching, and road base work on 3 town roads: Old Route One, Bartlett Hill Road, and Ashville Road. Call Mike Connors at 546.0940 if you need more information and/or have questions Scope of Work Old Route 1 Culverts -12" culvert near house #93 -12" driveway culvert- 2 nd driveway for #55 - 24' culvert- just east of Downeast Mexican #22 Ditching/shoulder grading -Starting at intersection of Route 1 (across from West Bay Rd) East side of road up to Barlett Hill Rd. intersection -Area across lot #93 to culvert -Section of road between utility pole #118218 to driveway of #45 -West end of road from intersection with Route 1 along east side of road up to #22 Bartlett Hill Rd. Culverts -15" culvert near intersection of Bartlett Hill and Old Route 1 -12" driveway culvert at #40 Ditching -East side of road from Old Route 1 intersection to # 1 -West side of road from #40 to culvert at road's end Ashville Rd. Culverts -15" driveway culvert at #236 -12" driveway (top of hill, no culvert currently) -15" culvert between # 225 and #205 Ditching -From large culvert at east end of road to the top of the hill on north side of road -Grade/fill area near large culvert, install rip rap at either end of culvert Remove asphalt/raise roadbed minimum of 1' -From utility pole #126135 to a distance of ~500' (pavement marked) Provide traffic control Grind all leading and following edges Asphalt driveways will have a ground and tapered apron 12" in depth Dirt driveways will have 12" in depth apron Sweep roadway prior to HMA placement Install hot bituminous asphalt 19mm shim/cap The overlay with be rolled to an average of one and three quarters (1 3/4 ") inches