Site work for a playground / park / athletic field in Old Forge, Pennsylvania. Completed plans call for site work for a playground / park / athletic field.

The bid shall be submitted in a sealed envelope containing Bid Proposal and Bid Bond or certified check and all forms listed in the attachments to the plans and specifications and shall be addressed to The Borough of Old Forge, and shall be plainly marked with the wording, "Pagnotti Park Baseball Infield Replacement Project -PHASE 1". The Project consists of the extension of new electric line and installation of new water service line and meter pit to an existing building adjacent to the baseball field. Construction of a new backstop along with the extension of 6' high chain-link fence and gates. The bid must be accompanied by a certified/cashier's check or Bid Bond in the amount of ten percent (10%) of the bid amount, made payable to The Borough of Old Forge. The Borough reserves the right to reject any or all bids or portions thereof or to waive any informalities in the bidding. If written notice of the acceptance of this Bid is mailed or delivered to the successful bidder within ten (10) days after the opening thereof, or at any time thereafter before the Bid is withdrawn, the said bidder agrees to execute and deliver the Project Agreement in the form prescribed by the Borough or forfeit said Bid Bond The contract documents contain requirements regarding nondiscrimination in hiring practices, and related matter, including performance and payment bonds and liability insurance. The Borough of Old Forge is an Equal Opp01iunity Employer and all qualified Bids of contractors will receive equal consideration without regard to Race, Color, Religion, Creed, Ancestry, National Origin, Gender or Sexual Orientation. Only Bidders receiving a full set of Documents by email from Reuther+Bowen, PC will be on record to receive Addenda. Factory fabricated, union, NPS 2 and smaller. a. Pressure Rating: 150 psig minimum or 250 psig at 180 deg F. b. End Connections: Solder-joint copper alloy and threaded ferrous; threaded ferrous. Factory-fabricated, bolted, companion-flange assembly, NPS 2-1/2 to NPS 4 and larger. a. Pressure Rating: 175 psig minimum or 300 psig. b. End Connections: Solder-joint copper alloy and threaded ferrous; threaded solderjoint copper alloy and threaded ferrous. Galvanized-steel coupling with inert and noncorrosive, thermoplastic lining, NPS 3 and smaller. a. Pressure Rating: 300 psig at 225 deg F. b. End Connections: Threaded. Electroplated steel nipple with inert and noncorrosive, thermoplastic lining. a. Pressure Rating: 300 psig at 225 deg F. b. End Connections: Threaded or grooved. Electroplated steel nipple with inert and noncorrosive, thermoplastic lining. a. Pressure Rating: 300 psig at 225 deg F. b. End Connections: Threaded or grooved. Metal, bolted, sleeve-type, reducing or transition coupling, with center sleeve, gaskets, end rings, and bolt fasteners and with ends of same sizes as piping to be joined. a. Standard: AWWA C219.